Well I have to sadly report that my Icom 765 has been cutting out power when I approach about 75watts output. It also had a very delayed power up. So today I cracked it open again, (last fix was the vfo). I was so happy to see the standard Icom 6-pin power plug. So I found a icom wire harness and plugged it into my power supply (the samlex 1235m) with the anderson power pole connection. I'd have to say it was pretty simple. Having common wire plugs sure makes everything easy. Those fins are SHARP! Fix it or Flip it? My radio works top notch without the internal supply. I read it might just be a bad solder. Looking at it from up top it might be a couple bad solder joints now..
1 Comment
9/27/2021 10:02:52 am
I have just repaired a IC 765 with a display problem, the item listed as ic3 is inside a sealed metal box which I had to cut open, replace four transistors and soled up again, all working fine now.
Reply
Your comment will be posted after it is approved.
Leave a Reply. |
Archives
June 2016
Categories |